IBM LTO5 Ultrium 5 1.5TB/3.0TB Data Cartridge 46X1290

The IBM LTO5 tape cartridge (46X1290) has a capacity of up to 1.5TB in native mode at up to 140 MB/s, and up to 3.0TB in compressed format at up to 280 MB/s. The IBM LTO 5 tape cartridge is brick red, uses Metal Particle (MP) as its storage particles, has 1,280 tracks and is 846m long. These IBM LTO 5 tape cartridges are backwards-compatible and therefore suitable for reading and writing in all LTO5 or LTO Ultrium 5 tape drives, reading and writing in all LTO6 or LTO Ultrium 6 tape drives, and reading only in LTO7 or LTO Ultrium 7 tape drives. Please note that this cartridge is identical to the Lenovo-branded LTO 5 tape, but the Lenovo brand is typically more expensive.

For the option of LTO barcode labels attached to your tapes, please see Application of Tape Barcode Labels for details.
Drives that use the IBM LTO Ultrium 5 data cartridges 46X1290 are recommended to use the IBM LTO Ultrium Universal Cleaning Cartridge 35L2086 to keep the drive clean.

For further information on the IBM LTO Ultrium 5 data cartridges 46X1290, please see the IBM LTO Ultrium Product Guide

The IBM LTO Ultrium 5 tape cartridge is built and tested to stringent LTO Ultrium Generation 5 specifications. This IBM LTO 5 tape provides up to 3 TB (with 2:1 compression) of capacity in a single cartridge and is available in rewritable and write-once, read-many (WORM) cartridge models. All models support I/T data encryption standards, a new dual-partition capability designed to enhance the performance of time-encoding applications and support future tape innovations from IBM. The ideal green storage for data centres, designed for long data retention and archiving with no power required at rest. Designed to help improve read/write reliability by storing IBM's statistical media read/write analysis on every use of the cartridge when used with IBM LTO tape drives. They are designed to adhere to widely supported Linear Tape-Open (LTO) Ultrium design specifications.

IBM LTO CARTRIDGE STORAGE:
To prevent condensation and for long life, the IBM LTO 5 Ultrium Data Cartridges should only be operated in or stored in the following conditions.

IBM LTO CARTRIDGE OPERATING ENVIRONMENT: 
10-45 degrees Celsius/Centigrade and 20-80% Humidity

IBM LTO CARTRIDGE STORAGE ENVIRONMENT: 
16-35 degrees Celsius/Centigrade and 20-80% Humidity

IBM LTO CARTRIDGE HANDLING:
Handle the IBM LTO Ultrium cartridge carefully. It may be damaged or degraded if it is dropped. Labels should be placed on the cartridge's front side in the recessed area. Do not put labels anywhere else on the cartridge, as this can damage the drive or cause load errors. When not in use, IBM LTO cartridges should be stored and transported in their plastic clamshell case. Do not store cartridges in direct sunlight.

IBM has discontinued these LTO5 Ultrium 5 (46X1290) cartridges, and we have limited stock left. These tapes are also available to overseas buyers. If you’re interested in purchasing some, please use "contact us," as our online store is only available to Australian and New Zealand buyers.