IBM LTO6 Ultrium 6 WORM Tape Cartridge 00V7591

The IBM LTO 6 WORM Data Cartridge, or IBM LTO Ultrium 6 WORM tape cartridge 00V7591, can hold up to 2.5TB of native (uncompressed) capacity at a transfer rate of 160MB/sec, and up to 6.25TB of compressed data at a transfer rate of up to 400MB/sec. The IBM LTO 6 WORM tape cartridge is black in colour, uses Barium Ferrite (BaFe) as it's storage particles, has 2,176 tracks and is 846m long. The IBM LTO 6 WORM tape is a Write Once Read Many (WORM) tape and is suitable for backup and archive when you wish to keep the data unchanged, but can read it as often as required. The IBM LTO 6 WORM tape cartridge supports partitioning and is backwards-compatible, making it suitable for reading and writing on all LTO 6 or LTO Ultrium 6 tape drives, and for reading on all LTO 7 or LTO Ultrium 7 tape drives. This is the first LTO Ultrium generation cartridge which is unable to be read in 2 drives ahead, the LTO8 or LTO Ultrium 8 tape drive. Please note that this cartridge is the same as the Lenovo-branded tape, but Lenovo is the retail brand and is usually more expensive!

For the option of LTO barcode labels attached to your tapes, please see Application of Tape Barcode Labels for details. This would then become the IBM LTO Ultrium Generation 6 WORM data cartridge pre-labelled 00V7591L.

Drives that use the IBM LTO Ultrium 6 WORM data cartridges 00V7591 are recommended to use the IBM LTO Ultrium Universal Cleaning Cartridge 35L2086 to keep the drive clean.

For further information on the IBM LTO Ultrium 7 WORM data cartridges 38L7303, please see the IBM LTO Ultrium Product Guide

IBM LTO CARTRIDGE STORAGE: 
To prevent condensation and ensure long life, the IBM LTO 6 Ultrium WORM Data Cartridges should only be operated or stored under the following conditions.

IBM LTO CARTRIDGE OPERATING ENVIRONMENT: 
10-45 degrees Celsius/Centigrade and 20-80% Humidity

IBM LTO CARTRIDGE STORAGE ENVIRONMENT: 
16-35 degrees Celsius/Centigrade and 20-80% Humidity

IBM LTO CARTRIDGE HANDLING:
Handle the IBM LTO Ultrium cartridge carefully. It may be damaged or degraded if it is dropped. Labels should be placed on the front side of the cartridge in the recessed area. Do not put labels anywhere else on the cartridge, as this can damage the drive or cause load errors. When not in use, IBM LTO cartridges should be stored and transported in their individual plastic clamshell case. Do not store cartridges in direct sunlight. Do not expose the cartridge to water or magnetic fields, and do not pull the tape out by hand or remove the screws to open the tape cartridge, as any of these actions may damage the tape and void the warranty.