Turtle Waterproof 539/039 Customisable Laptop Case 07-039005

$260.00 incl. GST

Add to cart

The Turtle Waterproof 039/539 Laptop Case 07-039005/07-539005. This case is an airtight, waterproof, ATA certified case with 13mm or 1/2" cubed pluckable foam. Remove the foam to create needed space. Ideal for laptops up to 17" long X 12" wide. Stainless steel hardware with double movement latches that are padlockable to prevent accidental opening for added protection.

Weight: 3.3 kg or 7.2 lbs
Inside Dimensions: 45.7 cm x 33 cm x 17.5 cm or 18" x 13" x 6.9"
Outside Dimensions: 50.3 cm x 40.6 cm x 19.3 cm or 19.8" x 16" x 7.6"

Certifications
Waterproof IPX7
Dustproof IP6X
Impact ATA 300
Drop Test ASTM D-4169 CC-18
Vibration STM D-4169 DC-18
Rainfall ASTM D-4169 DCc-18
Immersion MIL-STD-810F

Descriptions of Tests
ATA Specification 300 Category 1
Airline transport container suitable for a minimum of 100 airline trips
Impact Resistance Test; samples were exposed to impact using a bar weighing 13.2lbs with a hemispherical end of 3.2cm. Bar was dropped with its longitudinal axis vertical on to each sample’s weakest point from a height of 0.5m. Samples were conditioned to a temperature of -20°C before impact exposure.

ASTM D-4169 DC-18
Level 1 Schedule A Handling (Manual)
Drop tests - a series of drops on each edge, corner and face of the case from a height of no less than 48cm(19”) and with loads of 6.8-31.8kg(15-70lbs) determined by case size. Samples were conditioned at lab ambient conditions and then temperatures of -28°C and +60°C for a minimum of 3 hours at each condition.

ASTM D-4169 DC-18
Level 1, Schedule F loose load vibration
Vibration - The cases are tested using test method D-999 to determine the ability to withstand the repetitive shocks occurred during transportation of loose loads.

ASTM D-4169 DC-18
Level 1, Schedule H Environmental Hazard Rainfall
Simulated rainfall for 2hrs at a rate of 10cm/hr (4”). Samples were conditioned to -20 degrees C and +52 degrees C.

MIL-STD-810F
Method 512.4
Immersion - The case is submerged in a basin of water to a depth of 1 meter (3.28 ft) to the top most part of the case for 30 minutes. The case is heated to 10 degrees F higher than the temperature of the water.
IP 67 ingress protection
6- Total protection from dust
7- Protected against the effects of immersion between 15cm (5.9”) and 1m (39.37”)

Reviews

AVERAGE RATING:

Be the first to leave a review